Active POE Power Over Ethernet Splitter Adapter 48V To 12V For Camera Wifi Cable

• Popularity - 4021 views, 574.4 views per day, 7 days on eBay. Super high amount of views. 100 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

NEW 48V to 12V POE Splitter Connector Poe Power Adapter injector Switch for IP Camera Wifi Cable Wall US/EU Plug<br>Support the IEEE 802.3af the Power over Ethernet PoE Switch<br>Support 48V Unsolicited Power Over Ethernet PoE Switch<br>Support 48V Unsolicited Power Over Ethernet PoE Adapter<br>Specification:<br>Compliant with IEEE802.3af 15.4W<br>Isolation: 2.5kV<br>Power Input:  DC44~57V<br>Power Output: DC12V 1A~2A(Rated 1.3A,max.2A)<br>Data&Power INPUT Port: from RJ45 female<br>Data Output Port: RJ45 Male<br>Power Output Port: 5.5x2.1mm DC Power Plug<br>Data Transfer Rate:  10/100Mbps<br>Devices will be detected before poe input<br>Power Pin:support both 1/2(+),3/6(-)<br>Body size: 80 x 27x 22 mm<br>DC cable length：165mm<br>RJ45 Modular Plug cable length：155mm<br>Weight : 55g<br>DC Out Power Pin: inside positive (+)  outside  negative (-)<br>Operation Temperatue:-20℃ ~ 60℃<br>Notice:<br>Yellow LED(power) will be light up when DC Port connects to the device.<br>Green LED(data) never light in any circumstances,two reasons are below,<br>1.This splitter allows data to input and output through its RJ45,but no indicator on this splitter indicats the status of the data transfer,only one power indicator shows the working status of the POE.<br>2.due to the cost problem,the network interface component is from the universal components which own two LEDs on the market.